When using the switch, we should pay attention to the welding problem. For this problem, we will give you a detailed introduction. During the Spring Festival, we will update normally. Please pay attention to us.
When the switch is welded, it should be clearly seen: the welding cautions of the switch, the important wiring matters of the switch, the installation graphics of the switch, the installation drawing of the switch, the installation drawing of the switch, the welding drawing of the switch, the welding drawing of the switch, the wiring drawing of the switch and the wiring drawing of the switch.
Digging switch parameter description: When welding the switch, we should see the installation drawing of the switch, the installation size of the switch, the installation specification of the switch, the wiring diagram of the switch, the structure diagram of the switch, the principle diagram of the switch, the internal structure diagram of the switch, the working principle of the switch and the function of the switch.
I. Product Specifications:
1. Rated voltage: maximum 24VCD max.
2. Rated current of switching seldom: maximum 400 mA.
3. Rated current of switch frequently switching: maximum 150 mA.
4. Insulation impedance: minimum 100m_.
2. Mechanical properties:
1. Electrical life: 10,000 times.
2. Number of digits: 2-6.
3. Use temperature: -20 ~70 ~C.
Welding and cleaning process:
1. Hand welding: The temperature is controlled at 200 C and the welding time is about 10 seconds.
2. Wave welding: The temperature is controlled at 130 C and the welding time is about 2 seconds.
Above is some common sense about the welding of the switch, which can also bring us convenience.
QQ Online