Professional Switch Manufacturer
Service Hotline:13712077807

Detailed Explanation of Gear Problem of Dial Switch

Release Time:2019-05-27

 
The gear problem of the switch has been bothering us all the time. Today we will introduce the commonly used gear of the switch. It also needs to be carefully understood. Some professional knowledge will be explained to you slowly.
The switching switch is generally composed of three parts: metal shell, reed plastic support and switch blade. The insulating base of the switch sheet is generally glass silk plate, and there are two rows of cut-in fixed contacts pressed on it. There are small grooves on the plastic support with corresponding fixed occlusive sliding reeds in the groove. The metal shell fixes the reed plastic support with the switch blade. When switching the switch, the plastic bracket drives the spring to slide on the fixed contacts on the switching plate. The positioning beads and springs make the switching action positioning accurate, and can ensure that the switch does not dislocate under certain vibration conditions.
A toggle switch is a component that controls the switch's opening or disconnection by toggling a plastic handle to change the contact point.
The common gears of the switch are: 1 pole 2 bit, 1 pole 3 bit, 2 pole 2 bit, 2 pole 3 bit, 4 pole 3 bit, 4 pole 4 bit, 10 pole 3 bit, 4 Pole 10 bit, etc. Among them, multi-pole multi-bit switches larger than 3 poles are mainly used for band conversion. Some band switches can have as many as a dozen bits and can change more than a dozen switch gears.
This is the case with the gear problem of the switch. These problems need to be understood before installation and use.

Online

Online
Contact Us

Hotline

0769-85330959

Mobile

13712077807

Wechat
ONLINE