Introduction to the Resistance of Touch Switch

 

There will be resistance problems in the use of light touch switch. What effect will these resistance have on us? Let's give you a detailed introduction.

Once the product appears the phenomenon of high resistance value, how will it affect our switches? First of all, if the resistance value is high, that means the negotiation of the switch. If the contact area of the shrapnel is less than that of the shrapnel, the contact area of the shrapnel will lead to the non-contact of the switch. So once we do not touch the switch, it will become bad. So we must treat the problem of the resistance value of the switch carefully and rigorously.

Don't treat it as a minor problem. The requirement of plating is also quite high. If plated, the resistance value will be lower. Also, our switch will pass the life test before using. Then the life test will also affect the resistance value and the shrapnel, and the surface of shrapnel will be worn. If our electric power is very thin, then the resistance will gradually increase, so that the switch will not become. So in real life, we must strictly deal with the high resistance value of touch switch. If you don't understand this question, you can ask our customer service personnel. In this case, you can consult the service personnel online, and they will tell you what to do.

Moreover, some are very clear, switch his light press will not lead on, many consumers, they will find such a problem, in the use of products, often find that the button can not press, or can not press, or press in the dark, there is no response, then this problem is that the button does not lead on, sometimes it takes a lot of effort to press. Animal products can react.

So why does this problem arise? Our switches are first exposed to the air, so many of the finished products are not sealed, many are exposed to the air, consumer electronics is such that consumer electronics products he needs to heat, if the heat dissipation effect is not very good, this bad phenomenon will occur. Moreover, if it is in wet weather, then the opened shrapnel will be easily oxidized. After oxidation, its basic performance will not be as good as before, and the contact performance will be greatly reduced. So, there will also be problems of non-conduction. We must use him reasonably in advance.

Understanding these problems about resistance, when using and calculating the light touch switch, we can be more clear about these problems. Thank you for your understanding.